It all looks a bit crappy because I didn't have enough connectors. Is the Leonardo not capable for being used as a programmer?ĭo I need to connect the LEDs (with resistor) as suggested in the ArduinoISP sketch? In both cases I only get this error: avrdude: stk500_recv(): programmer is not respondingĪvrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x03 With that setting I tried to "burn bootloader" as well as uploading a random sketch. In the IDE I set the board to Arduino Leonardo, the programmer to AVR ISP and the port to the one the programmer Leonardo is connected to. Also I connected pin 10 of the programmer with the RESET pin of the faulty Leonardo and powered the faulty Leonardo through the power jack with a 9V power adapter.ĮDIT: I just remover the power adapter and instead connected the 5V pins of the ICSP port of both Leonardos. So I connected MISO with MISO, SCK with SCK, MOSI with MOSI and GND with GND. I hooked that programmer Leonardo up to the USB port of my PC and connected it to the second (malfunctioning) Leonardo based on this pin layout: MISO °. I only have a second Leonardo here, on wich I loaded the ArduinoISP sketch now to turn it into an AVR ISP programmer. Or is there a way to get him back on its feet?ĮDIT: Oh, forgot to mention, I am using version 1.6.7 of the IDE. avrdude: butterfly_recv(): programmer is not respondingīy now I tried different USB ports on my machine, different programms to compile and upload and unplugging/restarting the Leo at different times during the compiling/uploading. Lock 0 0 0 0 no 1 0 0 9000 9000 0x00 0x00Ĭalibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00ĭescription : Atmel AppNote AVR109 Boot LoaderĬonnecting to programmer. Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBackĮeprom 65 20 4 0 no 1024 4 0 9000 9000 0x00 0x00 System wide configuration file is "C:\Program Files (x86)\Arduino\hardware\tools\avr/etc/nf" "To hell with stability" I thought and uploaded the programm.Īfter the Leo did not realy produce the desired results, I changed my code and tried to upload it again, but I just got the following error message: Found upload port: COM12Ĭ:\Program Files (x86)\Arduino\hardware\tools\avr/bin/avrdude -CC:\Program Files (x86)\Arduino\hardware\tools\avr/etc/nf -v -patmega32u4 -cavr109 -PCOM12 -b57600 -D -Uflash:w:C:\Users\Hockner\AppData\Local\Temp\build43f01c5dd1676eb59a795ecd5e1796a4.tmp/LandesmuseumWB_:iĪvrdude: Version 6.0.1, compiled on at 19:59:58 I was trying to implement a buffer of 1000 integers and the compiler warned me about possible problems with stability, because I was using (84% used) of the Leos RAM. For example: :įor the digital mode, the digitalHandbrakeSwitch variable is used to set the level at which the handbrake is considered to be engaged.I am working with a Leonardo for the first time for a few days now. To select the operating mode, uncomment the line of the mode to be activated, and comment the mode to be deactivated. The connection between the handbrake and the pc is made by an Arduino Leonardo, as for the SRT pedals. The simus compatible with the analog mode are (non exhaustive list):įor the others, you can use the digital mod. The handbrake can be used either as a analog axis or as a button.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |